Newark Wire Cloth's engineers consider all aspects of our customers process assuring uniform flow characteristics and maximum bed utilization. If is essential to properly engineer distribution and collection systems for adsorption, ion exchange and filtration systems.
  • Hub Laterals
  • Header Laterals
  • Filter Nozzles
  • Flat Beds
  • Collectors
  • Distributors
  • SaniWedge

Newark Wire Cloth Co. has been manufacturing engineered filtration components for over 100 years. Combining that experience with ISO 9001:2008 quality management system, material and process control, assures our customers a partnership based upon capability, quality and experience. We pride ourselves in this rare combination. Within that scope is our Water and Process Industries product line. Newark provides engineered vessel internal for ion Exchange, Activated Carbon and Sand Filtration systems.

Hub and Header lateral systems are manufactured to provide uniform distribution and collection within the media bed insuring maximum utilization of the media. Lateral and Nozzle spacing is critical to assure flow equalization.

Often, lateral hole spacing and drill patterns are varied to accommodate.

Newark can supply either "SaniWedge" wedge wire or screen wrapped lateral economics as well as systems depending upon customer preference, media type and system requirements.

In addition, Newark offers a complete re-building and rescreening service for existing laterals. We offer "SaniWedge" as well as Square, Plain and Twilled Dutch weave. Woven Wire Cloth filter medium often utilize a backing screen for improved flow characteristics.

Filter Nozzles are supplied for new as well as replacements for existing Activated Carbon Systems, Ion Exchange Vessels or Sand Filters. "SaniWedge" Wedge Wire nozzles are supplied in varying slot retentions dependent upon Media Bed requirements. They are manufactured in a variety of connections included FPT, MPT, "T" Bolt and others.

Basket Strainers are supplied for Resin Traps with Newark Wire Cloth Vessels or for existing system housings. Sizing is critical and Newark Wire Cloth engineers are available to assist in the flow/ pressured drop calculations as well the mechanical requirements including alloy, temperature and pressure.

Filter Leaf fabrication is a combination of engineering, experience and technique. Accurately woven filter media, properly engineered drainage chambers and outlet configurations all contribute to a successful product. Our award winning SaniLeaf design attests to Newark Wire Cloth's success in this field.
  • SaniLeaf
  • Bare
  • Alloy or Synthetic
  • Filter Media
  • New Rebuild/Rescreen
  • Ail Styles

Filter Leaf filters are one of the oldest forms of filtration processes and are used in every process field including Chemical, Food, Drug, Water and Waste Treatment. Methods of construction, shape and styles are numerous.

Experience and understanding of this classic filtration process is paramount. Newark Wire Cloth, in its over 100 year history, has gained that knowledge and understanding.

Filter Leaves are manufactured in a variety of shapes and configurations. Rectangular, square, round and arc sided is a partial listing. Although many considerations, including these configurations, need to be accommodated in the manufacture of filter leaves, filter media (screen surface), flow chamber and outlet design lead the variables in importance.

Filter screens need to be matched to the pre-coat media used, resist clogging and offer clean cake release. The flow chamber is responsible for uniform effluent collection while maintaining leaf stability. Outlets need to accommodate the total flow of the leaf and provide a leak-proof seal to p the collector. The proper combination of these ingredients lead to longer filter runs, reduced maintenance and economical production cycles.

Because of Newark Wire Cloth's experience in the understanding of these considerations, we are an acknowledged leader in the field. "SaniLeaf" is an award winning and recognized superior construction consisting of precision woven filter cloth, "SaniGrid" high flow chamber and accurately machined outlets. This results in a more uniform cake buildup and pressure distribution, increasing filtration cycles and reducing downtime.

Newark has an added feature of a center collection element, used on larger filter leaves, dependent on the process, assuring uniform flow and application of pre-coat. It allows for a more even precoat and uniform cake build up by acting as a flow distributor within the leaf itself. It has an additional benefit as a structural member further assuring leaf stability, a significant design parameter insuring cake stability to avoid bypass.

Whether your requirement is an all welded leaf or bolted, Newark can provide new, rescreen or in some circumstances a complete rebuild, as economically feasible with round, center outlet designs or arc sided leaves with heavy duty outlets and hangers.
 

Newark Wire Cloth's Strainers are used worldwide in the Food, Chemical, Pharmaceutical and Water Treatment industries. Whether the products are anti-biotic creams, ion exchange resin or edible oils, the quality is consistent. Our engineering capability, fabrication techniques and quality standards that include, ISO 9001:2008, AS9100 Rev. C and NADCAP insures a credibility worthy of our customers.
  • Sanitary
  • Process
  • SaniWedge
  • Duplex

Newark Wire Cloth's product line of SaniClean Strainers are fabricated to the exacting standards of the Food and Pharmaceutical Industries. Strainers are engineered to suit our customer's process and are manufactured in a variety of styles and shapes including single and duplex configurations. Newark offers perforated., wire mesh, synthetic and "SaniWedge" wedge wire filter elements.

Engineered strainer products for the process industries are manufactured in a multitude of shapes, sizes and alloys. Whether the particulate retained or the filtrate is the desired product, our engineering department will develop the strainer system to meet your requirements, and we've been doing that for over 100 years!

Strainer elements are available in a combination of media including "SaniWedge" wedge wire, wire mesh or perforated, single and duplex. They are fabricated to suit specific process requirements. Complete basket strainers, replacement baskets, Resin Traps and conical line strainers are all fabricated to the same high quality specifications and standards.